Enhanced Wireless Modem Router; Setup Assistant - Belkin Enhanced Wireless Modem Router User Manual

ConnECTIng and ConfIgURIng yoUR ModEM RoUTER
sections
table of contents
1
1.2 Replacing an Existing Modem or Modem Router
Follow these steps if you currently have a modem or a modem router
that you will be replacing with your new Router�
Important: Please unplug the power adapter of your old modem from
your wall outlet first�
1� Unpack your new Router from the box and place it next to your old
modem� Raise the Router's antennas� Unplug your old modem's
power cord�
2�
Locate the cable that connects your old modem to your computer�
Unplug that cable from your old modem, and plug it into any yellow
port labeled "Wired" on the back of your new Router�

Enhanced Wireless Modem Router

1 2 3
3
ADSL
LAN
4
4 5 6
1
2
5
3�
Locate the cable that connects your old modem to the ADSL wall
jack� Unplug it from your old modem and then connect it to the
gray port labeled "ADSL line" on the back of your Router�
4� Plug your Router's power supply into the black port labeled
"Power" on the back of your Router�
5� Wait 20 seconds for the Router to start up� Look at the display on
the front of the Router� Make sure the "Wired" and "Router" icons
are lit in green� If they are not, recheck your connections�
IMPoRTanT:
Run the Setup Assistant from the computer that is
directly connected to the Router from Step 1�1B�
15
7 8 9 10