Belkin Enhanced Wireless Modem Router User Manual page 37

UsIng THE WEb-basEd adVanCEd UsER InTERfaCE
sections
table of contents
Setting your Connection Type to Dynamic/Fixed IP (1483 Bridged)
This connection method bridges your network and ISP's network
together� The Router can obtain an IP address automatically from your
ISP's DHCP server or accept a fixed IP address assigned by your ISP�
Enhanced Wireless Modem Router
1 2 3 4 5 6
for dynamic IP connection:
1� IP assigned by IsP - Select "Yes" if your ISP instructed you to use
Dynamic IP�
2� VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) parameter here� These identifiers are assigned by
your ISP�
3� Encapsulation - Select LLC or VC MUX your ISP uses�
Click "Apply Changes" to save and activate your settings� To go back to
the original settings before saving, click "Clear Changes"; or click any of
the Quick-Navigation links for other options� Your new settings will not
be saved unless you click "Apply Changes"�
35
7 8 9 10