Table of Contents
Advertisement
2.
Within 3 seconds, press the
3.
The P-lights will flash once
To take the system out of home valet mode:
•
Turn the ignition key to the IGNITION ON (RUN) position.
The system will warn you if someone attempts to start your vehicle while it stands in home valet
mode. The parking lights will:
Turn ON then OFF; then
Flash twice, pause; then
Flash twice again.
AUX 1
Note: This 500 mA negative Aux 1 output can be used for many different applications
Priority door:
This great feature allows the user to unlock solely the driver's door with a single press of
the
button on the transmitter, and to unlock the other doors, if desired, by pressing
the
button for a second time.
The output will provide a 1-second negative output when the
second time on the transmitter.
Horn Confirmation:
AUX 1 can be programmed to trigger the horn every time the
when the
activated, panic mode is enabled. If horn confirmation is disabled, panic mode will not
be available.
Horn Chirp Timing
The pulse duration can be configured by your installer (from 5 ms to 200 ms).
Multicar Operation
This option allows the owner of two vehicles, both equipped with the same Remote Car Starter
model, to control both systems with a single remote control. To control the second vehicle,
simultaneously press the TRUNK button and the button of the function you wish to use.
Note: Your remote control must be configured for second car operation by the installer.
Press TRUNK + LOCK buttons simultaneously: .. LOCK
Press TRUNK + UNLOCK simultaneously: .......... UNLOCK
Press TRUNK + START simultaneously: .............. START
Press TRUNK + STOP simultaneously: ................ STOP
Press TRUNK + START simultaneously for 3 sec: Cold Weather Mode
OEMStyle Alarm
The OEM-style alarm (if configured by your installer) monitors the doors, hood and ignition switch
of your vehicle. It will sound the horn if a door or the hood is opened, or if the key is turned in the
ignition.
• To arm the OEM-style alarm, press the
-The OEM-style alarm will ONLY arm if the
-The LED on the antenna will flash slowly to indicate that the OEM-style alarm is now armed.
•
To disarm the OEM-style alarm, press the
P.12
and
button is pressed twice within 3 seconds. When horn confirmation is
buttons simultaneously for 3 sec.
button on the transmitter.
button on the transmitter is pressed.
button on the transmitter.
button is pressed a
button is pressed, or
User Guide
Hide quick links:
Advertisement
Table of Contents
