Home Valet Tm " Mode; Aux 1 - Directed Electronics AS-1775 User Manual

5 button automatic/manual transmission remote starter
Hide thumbs Also See for AS-1775:
Table of Contents

Advertisement

4.
Press the
and confirm that the vehicle is in Turbo Mode.
5.
The engine will shut down after 60 seconds.
If your vehicle has a manual transmission, follow all steps of the Ready Mode routine (page-5) to
activate Turbo Mode. At the last step, press either:
to lock the doors and have the engine shut down after 60 seconds;
The parking lights will flash 3 times and remain lit.
The OEM-style alarm and starter kill (if configured) will be armed.
to unlock the doors and have the engine shut down after 60 seconds;
The parking lights will flash 3 times and remain lit.
to shut down the engine without affecting the doors.
Note: The vehicle will enter Ready Mode once the engine run time expires.
"Home Valet
TM
If configured at installation, this feature will remotely set the vehicle to a no-remote-start mode: if
the vehicle is parked indoors there is no danger of it starting accidentally by remote control. If the
vehicle has a manual transmission, it should be set into ready mode before activating the Home
Valet™.
Note: Once the Home Valet Mode is activated, the vehicle will not start by remote, but the
OEM alarm functions will remain active.
To take the system into home valet mode:
1.
Press the
2.
Within 3 seconds, press the
3.
The P-lights will flash once
To take the system out of home valet mode:
Turn the ignition key to the IGNITION ON (RUN) position.
The system will warn you if someone attempts to start your vehicle while it stands in home valet
mode. The parking lights will:
Turn ON then OFF; then
Flash twice, pause; then
Flash twice again.
AUX 1  
Note: This 500 mA negative Aux 1 output can be used for many different applications
Priority door:
This great feature allows the user to unlock solely the driver's door with a single press of
the
button on the transmitter, and to unlock the other doors, if desired, by pressing
the
button for a second time.
The output will provide a 1-second negative output when the
second time on the transmitter.
Horn Confirmation:
AUX 1 can be programmed to trigger the horn every time the
when the
User guide
button; this will lock the doors, arm the OEM-style alarm (if configured|)
" Mode 
or
button.
button is pressed twice within 3 seconds. When horn confirmation is
and
buttons simultaneously for 3 sec.
button is pressed a
button is pressed, or
P.11

Advertisement

Table of Contents
loading

Table of Contents