Table of Contents
Advertisement
ALARM OUT: The alarm output signal is provided
at this terminal for the Time Lapse VCR.
12. Data Terminal
These terminals are used to transmit / receive
control data to / from a Personal Computer. Use
data grade cable, suitable for RS-485 (2 shielded,
twisted pairs), cable length may be extended up to
4,000 ft. (1,200m).
Designatio
n
Personal Computer
T (A)
T (B)
Personal Computer
GND
Personal Computer
R (A)
R (B)
Personal Computer
GND
13. Termination Switch (TERM ON/OFF)
This switch is used to enable termination of this
controller's data terminal.
Direction
Controller
Controller
Controller
Controller
-6-
14. Video Output Connector (VIDEO OUT)
A 1.0 Vp-p / 75
composite video signal is provid-
ed at this connector.
15. Camera Input Connector (CAMERA IN)
This connector accepts either a color or B/W com-
posite video signal from the camera. Also, VD2, to
synchronize camera in vertical timing, and data, to
control camera site devices, are multiplexed
through this connector.
16. DC 12V Input Terminal (DC 12V IN)
This terminal accepts 12V DC (10.8 - 16.0V DC)
power source.
Cautions :
1. Connect to a 12V DC class 2 power supply only.
2. To prevent fire or shock hazard, the UL listed
wire VW-1, style 1007 should be used for the
cable for DC 12V Input Terminal.
Advertisement
Table of Contents
