Table of Contents
Advertisement
2. Entering Program Menu
By pressing the Program (PROG) Switch for more
than 2 seconds, when Mode Selection Switch is
selected at Normal (NORMAL) position or Alarm
Off (ALARM OFF) position, the following displays
appear on the monitor screen.
** Program Menu **
Camera Control *
Receiver Control *
Camera Set Up *
Controller Set Up *
As shown in Fig. 2, the Program Menu has four main
sub menus: Camera Control, Receiver Control, Camera
Setup and Controller Setup. These sub menus are fur-
ther divided in to additional submenus.
Fig. 1
Program Menu
Camera Control
Receiver Control
Camera Set Up
Controller Set Up
Move the cursor to the desired program by pressing the
Up (D) Switch or the Down (C) Switch on the con-
troller, then press the Set Switch to select program
where the cursor is positioned.
-14-
Iris Control
Sens Up Control
Shutter
BLC
AGC
White Balance
Pan/Tilt Control (Manual)
Zoom/Focus Control
AUX 1, 2 Control
Wiper/Defroster
Pan Action
(Auto/Random Panning)
System
Communication
Fig. 2
Advertisement
Table of Contents
