Using Analog Audio - Insignia NS-28ED200NA14 User Manual

Insignia 28" LED TV/DVD Combo

Using analog audio

When you connect an analog home theater system to the
On your TV
3.5mm audio
cable connector
/AUDIO OUT
jack
To connect a home theater system using analog audio:
1 Make sure that your TV's power adapter is unplugged and the home theater system is turned off.
2 Connect a 3.5mm audio cable (not provided) to the
AUDIO IN jacks on the analog home theater system.
3 Plug your TV's power adapter into a power outlet, then turn on your TV and the home theater system.
Note
• For information about selecting the audio out mode for a home theater,
• You can connect headphones, an amplifier, a home theater system, or a
see the Headphone/Audio Out option in
page 45.
sound bar to the /AUDIO OUT jack. If you want to use headphones,
you need to disconnect the amplifier, home theater system, or sound
bar.
www.insigniaproducts.com
/AUDIO OUT jack, the TV speakers are muted.
Side of TV
3.5mm audio cable
/AUDIO OUT jack on the side of your TV and to the
"Adjusting sound
Home theater system
settings" on
31