Sharp GZ200 User Manual page 48

Recording Video Clips
Sound can be recorded with the video clip.
→
"Camera" "Video Camera"
The preview is displayed through the screen.
1.
Press or the side-down key to start recording
the video clip.
The sound for recording the video clip occurs.
If you press or the side-down key again, or
when the recording is completed, the sound for
ending the video clip recording occurs and the
display transits to step 2.
2.
Select "Save".
"Saving (file name) to Gallery..." is displayed, then
the video clip is saved.
To preview a video clip before saving, select
"Preview".
To send a video clip by MMS message after
recording the video clip, select "Save and Send".
To record a video clip again, press [Cancel].
Remaining sets indicator
123 : Indicates the remaining sets of video
clips that can be recorded.
Tip
• If you wish to use a flash, press R or the side-up key
before step 1. Press it again to turn the light off.
48 Camera
Using the Zoom Function
Press c or d to change the zooming ratio.
Zooming ratio indicators
: Magnification
Selecting the Recording Size Mode
You can select the recording size mode.
→
"Camera" "Video Camera"
"Record Size"
1.
Select "Extended Video" or "For MMS".
Note
• If "For MMS" is selected, the size of the video clip
that can be recorded depends on the message size set
in MMS settings (p. 55).
• When the Message Size described on page 55 is set
to"100 KB", "Record Size" is not displayed.
• "Save and Send" is not displayed after recording in
extended video mode.
• This option is not applicable to some service
providers. Please contact your service provider for
more information.
Selecting Video Quality
→
"Camera" "Video Camera"
"Video Quality"
1.
Select "Normal" or "Fine".
Video quality indicators
: Fine
: Normal
→ →
[Options]
→ →
[Options]