Sharp GZ200 User Manual page 24

Note
• Conference call service may not be available on all
networks. Contact your network operator for more
information.
• You have more options for the Conference call in step
2:
• To put all participants on hold, select "Conf. Hold
All".
• To put all participants except the current call on
hold, select "Private".
• To end the call with all participants, select
"Release All".
• To disconnect from the conference call but still
allow the other participants to continue talking
together, select "Transfer".
• To put the current call on hold and continue to
have a conference call with the remaining
participants, select "Exclude".
• To reject adding more participants to the current
party, select "Reject", or you can send the busy
tone by selecting "Busy".
24 Call Functions
To Add New Participants to the Conference Call
1.
Press [Options] and select "Dial".
2.
Enter the number you wish to include in the
conference call and press D to dial.
3.
Press [Options] and select "Multiparty".
4.
Select "Conference All" to join the conference call.
If you wish to add other participants, repeat steps 1
to 4.
To End the Call with a Conference Call Participant
1.
During a conference call, highlight the person that
you wish to disconnect from the conference call.
2.
Press [Options] and select "Release Call".