Setting the External Display
To Select the Backlight Time Out
You can select the backlight time out for the external
display.
→
"Settings"
"Display"
"Backlight"
1.
Select the desired time. Select "Off" to turn it off.
To Adjust the Contrast
You can adjust the LCD contrast of the external display
between 9 levels.
→
"Settings"
"Display"
"LCD Contrast"
Adjust the brightness by pressing a (High) and b
1.
(Low) for maximum clarity.
2.
Press
.
Display Setting Reset
The display settings can be reset to their default
settings.
→
"Settings"
"Display"
1.
Enter your handset code.
The default handset code is "0000". For details on
changing the handset code, see "To Change Handset
Code" on page 116.
(M 9-1-2)
→
→
"External Display"
→
→
"External Display"
(M 9-1-8)
→
"Set to Default"
Call Settings
(M 9-2)
Set various types of functions and services.
(M 9-2-1)
Diverts
This service is used to divert incoming calls to your
voicemail system or to another number depending on
certain conditions in which you cannot answer a call.
To Divert Calls
→
"Settings"
"Call Settings"
1.
Select one of the following options.
• "All Calls":
Diverts all voice calls without
ringing.
• "When Busy":
Diverts incoming calls when you
are on a call.
• "No Answer":
Diverts incoming calls if you do
not answer a call within a certain
period of time.
• "Not Reachable": Diverts incoming calls when your
phone is out of network service or
switched off.
2.
Select "On".
3.
Select the desired Phonebook entry including a
phone number you wish to divert.
If the desired entry does not exist, select "Enter
Number" and enter the phone number.
→
"Diverts"
Settings
103