Checking Selected Patterns; Inserting Pattern; Deleting Patterns; Editing Of Each Pattern - Singer 9985 Instruction Manual

The cursor is used to check selected patterns,
insert patterns, delete patterns or edit each pattern
as described below.
C. CHECKING SELECTED PATTERNS
As the length of the string increases, patterns
will disappear from view on screen.
You can check patterns by moving the cursor
upward using the cursor buttons.
D. INSERTING PATTERN
1. Machine will insert a pattern to the above of the
highlighted letter or pattern.
2. Using the cursor buttons, move the cursor to
highlight the pattern just before the desired
position for the new pattern. Select the pattern.
E. DELETING PATTERN
1. Shift the cursor to the pattern you want to
delete.
2. Touch the delete button quickly (less than 0.5
sec.). Machine will delete the pattern and cursor
will shift to next pattern.
a. When the cursor is at furthest bottom side,
machine will delete just before pattern.
3. If you want to delete all patterns, touch and hold
the delete button (over 0.5 sec.).
Machine will delete all selected patterns.
F. EDITING OF EACH PATTERN
You can change the settings (mirror/reverse,
elongation and stitch width/length) of each stitch
pattern.
1. Touch the Edit button.
LCD will change to the editing mode.
2. As you shift the cursor, the settings of each
pattern will be indicated.
You can edit as below a-d. (Next page)
3. You can return to selecting mode by touching
the return button.
Note:
Letter stitches cannot change settings (mirror/
reverse, elongation and stitch width/length).
90
C
D
E
F