Reverse Stitching; Auto Tack Stitch - Singer 9985 Instruction Manual

B. REVERSE STITCHING
Reverse stitching is used for reinforcing the
ends of the seams.
1. Place the fabric in position where back stitching
is to be made and lower the presser foot.
2. Press and hold the reverse button.
Sew 4-5 reverse stitch.
3. Release the reverse button and press the start/
stop button (or press the pedal). Machine will
change to forward sewing.
4. When you reach the end of seam, press and
hold reverse button and sew 4-5 reverse
stitches.
Note:
Stitch patterns No. 3 and No. 4 have a built-in
reverse stitch. See page 50 for information on how
to sew these stitches.
C. AUTO TACK STITCH
You may sew tack stitches at the beginning and
end of the stitch.
This function can be used with all utility
patterns.
1. Touch the tack button.
Button will be highlighted.
2. Start to sew.
Machine will sew tacking stitches automatically
and then start to sew the selected pattern.
3. When you reach the end of seam, press the
reverse button once.
Machine will sew tacking stitches and stop
automatically.
4. If you want to cancel this function, touch the
tack button again. Highlight will turn off.
46
b