Fluke 80 Series V Getting Started Manual page 13

Switch
Button
Position
D
Any switch
position
MIN MAX
recording
Frequency
counter
Power-up
H
Any switch
position
E
Continuity
ReE
MIN MAX
recording
Hz, Duty
Cycle
Power-up
Table 4. Pushbuttons (cont.)
AutoHOLD (formerly TouchHold) captures the present reading on the display. When a new, stable reading is detected, the
Meter beeps and displays the new reading.
Stops and starts recording without erasing recorded values.
Stops and starts the frequency counter.
Turns on all LCD segments.
Turns the backlight on, makes it brighter, and turns it off.
H
For Model 87, hold down for one second to enter the HiRes digit mode. The "HiRes" icon appears on the display.
To return to the 3-1/2 digit mode, hold
Turns the continuity beeper on and off
Switches between Peak (250 s) and Normal (100 ms) response times.
Toggles the meter to trigger on positive or negative slope.
Disables the beeper for all functions. The Meter reads "
Function
H
down for one second. HiRes =19,999
bEEP
E
" until
Multimeters
The Meter's Features
is released.
7