Table of Contents
Advertisement
VIVOTEK
Status LED
The LED indicates the status of the Network Camera.
Item LED status
Green and Red lit for once, and then turn steady red
1
Red LED off
2
Steady Red and Green blinking every 1 sec.
Steady Red and Green LED is off
Red blinking every 0.15 sec., and Green LED blinking
3
every 1 sec.
Red blinking every 0.15 sec. and Green LED blinking
4
every 0.15 sec.
General I/O Terminal Block
This Network Camera provides a general I/O terminal block which is used to connect
external input / output devices. The pin definitions are described below. The 24V AC and
DC 12V can be used as an alternate power source.
NOTE:
The max. load for power output pin 8,
12V DO, is 50mA.
12 - User's Manual
Description
Power on and system booting
Power off
Network normal (heartbeat)
Network failed
Upgrading firmware
Restoring default
1 AC 24V IN
2 AC 24V IN
3 DC12V+ IN
4 DC12V- IN
5 DI-
6 DI+
7 DO-
8 DO+
9 N/C
10 N/C
11 EXT_MIC
12 Audio Out
13 Audio GND
14 TV Out
15 GND
Advertisement
Table of Contents
