D-Link NetDefend DFL-210 User Manual page 468

max sessions, 78
specifying port number, 76
SYN flood protection, 77
TCP and UDP, 76
sgs file extension, 36
Silently Drop State ICMPErrors setting, 436
simple network management protocol (see SNMP)
SIP
ALG, 216
record-route, 218
SLB (see server load balancing)
SMTP
ALG, 207
ESMTP extensions, 209
header verification, 213
log receiver with IDP, 272
whitelist precedence, 208
SNMP
advanced settings, 60
community string, 59
MIB, 59
monitoring, 59
traps, 51
with IP rules, 59
SNMP Before Rules setting, 60
SNMP Request Limit setting, 61
source based routing, 137
SPAM filtering, 210
caching, 214
logging, 213
tagging, 212
spam WCF category, 256
spanning tree relaying, 177
spillover RLB algorithm, 141
spoofing, 193
SSH, 34
SSH Before Rules setting, 43
SSL acceleration, 240
state-engine, 17
packet flow, 20
stateful inspection (see state-engine)
stateful NAT pools (see NAT)
Static address translation (see SAT)
Static ARP Changes setting, 99
Strip DontFragment setting, 430
switch routes (see transparent mode)
Sync Buffer Size (HA) setting, 418
Sync Pkt Max Burst (HA) setting, 418
SYN flood protection, 77, 279
and ALGs, 197
syslog, 50
System Contact (SNMP) setting, 61
System Location (SNMP) setting, 61
System Name (SNMP)setting, 61
T
tab completion (see CLI)
TCP Auto Clamping setting, 431
TCP ECN setting, 434
TCP FIN/URG setting, 434
TCP FIN Idle Lifetime setting, 439
TCP Idle Lifetime setting, 439
TCP MSS Log Level setting, 431
TCP MSS Max setting, 431
TCP MSS Min setting, 431
TCP MSS On High setting, 431
TCP MSS on Low setting, 431
TCP MSS VPN Max setting, 431
TCP NULL setting, 434
TCP Option ALTCHKDATA setting, 433
TCP Option ALTCHKREQ setting, 432
TCP Option Con Timeout setting, 433
TCP Option Other setting, 433
TCP Option SACK setting, 432
TCP Option Sizes setting, 431
TCP Option TSOPT setting, 432
TCP Option WSOPT setting, 432
TCP Reserved Field setting, 434
TCP Sequence Numbers setting, 434
TCP SYN/FIN setting, 433
TCP SYN/PSH setting, 433
TCP SYN/RST setting, 433
TCP SYN/URG setting, 433
TCP SYN Idle Lifetime setting, 439
TCP URG setting, 434
TCP Zero Unused ACK setting, 432
TCP Zero Unused URG setting, 432
Teriary Time Server setting, 118
TFTP ALG, 206
threshold rules, 399, 422
in zonedefense, 422
time synchronization, 114
Time Sync Server Type setting, 118
Time Zone setting, 117
TLS ALG, 239
traffic shaping, 378
bandwidth guarantees, 385
bandwidth limiting, 381
FwdFast IP rule exclusion, 380
groups, 387
objectives, 378
precedences, 383
recommendations, 388
summary, 389
with IDP, 394
Transaction Timeout (DHCP) setting, 188
Transparency ATS Expire setting, 178
Transparency ATS Size setting, 178
transparent mode, 167
advanced settings, 177
and internet access, 171
and NAT, 172
grouping IP addresses, 172
implementation, 168
single host routes, 169
switch routes, 167, 169
with high availability, 171
with VLANs, 170
vs routing mode, 167
TTL Min setting, 428
TTL on Low setting, 428
tunnels, 80
U
468
Alphabetical Index