9.2.7. PPTP Roaming Clients
•
Enable Proxy ARP on the int interface.
•
As in L2TP, enable the insertion of new routes automatically into the main routing table.
3.
Define a User Authentication Rule, this is almost identical to L2TP:
Agent
PPP
4.
Now set up the IP rules in the IP rule set:
Action
Allow
NAT
As described for L2TP, the NAT rule lets the clients access the public Internet via the D-Link
Firewall.
5.
Set up the client. For Windows XP, the procedure is exactly as described for L2TP above but
without entering the pre-shared key.
Auth Source
Src Network
Local
all-nets
Src Interface
Src Network
pptp_tunnel
pptp_pool
pptp_tunnel
pptp_pool
Interface
pptp_tunnel
Dest Interface
any
ext
331
Chapter 9. VPN
Client Source IP
all-nets (0.0.0.0/0)
Dest Network
Service
int_net
All
all-nets
All