D-Link NetDefend DFL-210 User Manual page 176

4.7.3. Transparent Mode Scenarios
• Interfaces: Select lan and dmz
3. Click OK
Configure the routing:
1. Go to Routing > Main Routing Table > Add > SwitchRoute
2. Now enter:
• Switched Interfaces: TransparentGroup
• Network: 10.0.0.0/24
• Metric: 0
3. Click OK
Configure the rules:
1. Go to Rules > IP Rules > Add > IPRule
2. Now enter:
• Name: HTTP-LAN-to-DMZ
• Action: Allow
• Service: http
• Source Interface: lan
• Destination Interface: dmz
• Source Network: 10.0.0.0/24
• Destination Network: 10.1.4.10
3. Click OK
4. Go to Rules > IP Rules > Add > IPRule
5. Now enter:
• Name: HTTP-WAN-to-DMZ
• Action: SAT
• Service: http
• Source Interface: wan
• Destination Interface: dmz
• Source Network: all-nets
• Destination Network: wan_ip
• Translate: Select Destination IP
• New IP Address: 10.1.4.10
6. Click OK
7. Go to Rules > IP Rules > Add > IPRule
8. Now enter:
• Name: HTTP-WAN-to-DMZ
• Action: Allow
• Service: http
• Source Interface: wan
176
Chapter 4. Routing