D-Link NetDefend DFL-210 User Manual page 361

Network security firewall
Hide thumbs Also See for NetDefend DFL-210:
Table of Contents

Advertisement

9.4.6. IPsec Advanced Settings
Chapter 9. VPN
IPsec Before Rules
Pass IKE and IPsec (ESP/AH) traffic sent to NetDefendOS directly to the IPsec engine without
consulting the rule set.
Default: Enabled
IKE CRL Validity Time
A CRL contains a "next update" field that dictates the time and date when a new CRL will be
available for download from the CA. The time between CRL updates can be anything from a few
hours and upwards, depending on how the CA is configured. Most CA software allow the CA
administrator to issue new CRLs at any time, so even if the "next update" field says that a new CRL
is available in 12 hours, there may already be a new CRL for download.
This setting limits the time a CRL is considered valid. A new CRL is downloaded when
IKECRLVailityTime expires or when the "next update" time occurs. Whichever happens first.
Default: 86400 seconds
IKE Max CA Path
When the signature of a user certificate is verified, NetDefendOS looks at the issuer name field in
the user certificate to find the CA certificate the certificate was signed by. The CA certificate may in
turn be signed by another CA, which may be signed by another CA, and so on. Each certificate will
be verified until one that has been marked as "trusted" is found, or until it is determined that none of
the certificates are trusted.
If there are more certificates in this path than what this setting specifies, the user certificate will be
considered invalid.
Default: 15
IPsec Cert Cache Max Certs
Maximum number of certificates/CRLs that can be held in the internal certificate cache. When the
certificate cache is full, entries will be removed according to an LRU (Least Recently Used)
algorithm.
Default: 1024
IPsec Gateway Name Cache Time
Maximum number of certificates/CRLs that can be held in the internal certificate cache. When the
certificate cache is full, entries will be removed according to an LRU (Least Recently Used)
algorithm.
Default: 1024
DPD Metric
The amount of time in tens of seconds that the peer is considered to be alive (reachable) since the
last received IKE message. This means that no DPD messages for checking aliveness of the peer
will be sent during this time even though no packets from the peer have been received during this
time.
361

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents