Using The Surround Back Speakers - Panasonic SH-FX71 Operating Instructions Manual

Setup

Using the surround back speakers

By using 2 sets of SH-FX71, you can enjoy 7.1-channel
playback, making the surround speakers and surround back
speakers wireless ( 7).
Use only a digital transmitter supplied with the SH-FX71.
Wireless system is originally paired to work with the
digital transmitter that comes along with it. For the digital
transmitter to work with the additional wireless system,
pairing is necessary.
Wireless system
e.g. After pairing
≥Keep the digital transmitter of the additional wireless system
10
for later use.
10
Home theater unit
Pairing is necessary.
Additional wireless system
∫ Pairing
Preparation
≥Make sure to connect the AC mains lead of the additional
wireless system.
≥Turn on the home theater unit and reduce the volume.
1 Turn on the additional wireless system.
2 While pressing the stop button (e.g. [
unit, press the numbered button [2] on the remote control
until "P" lights in the home theater unit's display.
3 While "P" is displayed, press
[I/D SET] on the rear of the
additional wireless system.
≥The indicator on the
additional wireless system
turns green.
≥If "P" goes off before you
press [I/D SET], repeat
step 2 and then continue
the procedure.
4 While pressing the stop button on the home theater unit,
press the numbered button [2] on the remote control.
5 Turn off and on the additional wireless system.
≥Make sure the indicator on the additional wireless system
lights up green.
[Note]
≥If you should change the digital transmitter card, repeat the
pairing steps using the new digital transmitter.
≥SH-FX71 cannot be used with SH-FX65, SH-FX67 or
SH-FX70.
]) on the home theater
∫

Use a pointed object.