Panasonic WJ-ND200 Operating Instructions Manual page 21

Skips to the latest
recorded image
Playback on a multi-
screen
Text
( page 38)
• Skips to the latest time of the image currently playing and
plays it. Skips to the point 30 seconds before the time of the
latest recorded image with the default setting.
The following points are available to be skipped to.
5 s/10 s/30 s/1 min/5 min
Refer to a system administrator for further information.
• When the [GO TO LAST] button is clicked while displaying live
images, playback of the latest recorded images from the
selected camera channel will start.
Note:
When the [GO TO LAST] button is clicked while recording
images at a lower recording rate, playback of the latest
recorded images may be paused or images may not be dis-
played.
• Displays playback images on a 4-Screen.
• Up to 4 camera images can be displayed simultaneously on a
4-Screen.
Each time this button is clicked, images consisted from 4 cam-
era channels (4A - 4D) set in advance (monitor display set-
ting) will be switched and displayed sequentially on a 4-
Screen.
Refer to the setup instructions (PDF) for descriptions of how
to perform the monitor display setting.
• Click a camera title in the [Camera Select] box or the camera
title displayed on the image to return to a single screen dis-
play.
Notes:
• When displaying images on a multi-screen, it may cause out-
of-sync between each channel. In this case, click the [PLAY]
button after clicking the [PAUSE] button to correct the syn-
chronization between each channel.
• When frame play is performed while displaying images on a
multi-screen, displayed paused images of each channel may
not simultaneously go to the next/previous frame.
• The attached text information will be displayed when this but-
ton is clicked during pausing.
Click the [TEXT] button after pausing playback.
• The text information display/edit is available only when a
recorded image is played on a single screen.
21