Operational Mode; Check The Current Operational Mode - Panasonic WJ-ND200 Operating Instructions Manual

Operational Mode

There are two operational modes; the mirroring mode and the single mode.
Mirroring mode: The two hard disk drives are used with the mirroring function and images from the camera will be
recorded on them simultaneously. Even when one of them becomes faulty, images from the camera will be
recorded on the other one.
Single mode: The two hard disk drives are used independently.
It is recommended to use this unit in the mirroring mode when using this unit for the first time. (When switching to the
mirroring mode after using the unit in the single mode, images recorded on the hard disk drives will be deleted.)

Check the current operational mode

The MIRROR indicator on the front panel of the unit indicates the current operational mode.
MIRROR indicator
ERROR MIRROR
HDD1
TIMER
REC HDD2
LINK ALARM BUZZER
/ACT SUSPEND STOP
OPERATE
ALARM
MIRROR indicator
Off
Being lit green
Blinking green
Being lit red
10
Network Disk Recorder WJ-ND200
Status (Current operational mode)
In the single mode
In the mirroring mode
In the process of data recovery in the mirroring mode
In the mirroring mode with the following status
• One of the hard disk drive is faulty
• Only one hard disk drive is mounted
• No hard disk drive is mounted