Compatibility; Power And Dock - Brookstone iConvert Scanner V2 User Manual

coMPaTIbIlITY

iPod touch (4th generation)
®
iPhone 4S
iPhone 4

PoWeR anD Dock

1 . Connect the ADAPTER cord to the Scanner, and plug the ADAPTER into
a power outlet .
2 . Press and hold the POWER BUTTON for up to 3 seconds to turn the Scanner
on . The POWER LED will blink blue for a moment and then remain solid .
3 . Turn on your device and dock it carefully on the 30-PIN CONNECTOR
on the scanner . Make sure it sits firmly in place .
4 . To turn the Scanner off, press and hold the POWER BUTTON again .
The POWER LED will shut off .
Notes:
• Do not dock device to the Scanner when the POWer LeD is blinking.
Wait until the blinking stops.
• Check the battery level in the upper-right corner of your device's home
screen. Make sure it's at least above 20% when docked. If not, please
charge the battery prior to docking.
• Do not connect the Scanner to a USB port in case of insufficient power.
7
iPad (3rd generation)
iPad 2
iPad