Cleaning The Roller - Brookstone iConvert Scanner V2 User Manual

CLeANINg tHe rOLLer

1 . Tap the Settings icon in the top right hand corner of your device's screen .
2 . Tap Clean .
3 . Grip the ROLLER CLEANER by the STOPPER STRIP, with the
STOPPER STRIP facing DOWN .
4 . Insert the ROLLER CLEANER'S edge into the FEED SLOT .
5 . Tap the Clean button . The ROLLER CLEANER will be pulled into the slot,
then will be halted by the STOPPER STRIP, allowing the roller to spin and
clean itself on the ROLLER CLEANER .
6 . When the roller stops spinning, pull the ROLLER CLEANER back out of the
FEED SLOT .
7 . The screen will return to the Scan screen and show the message
"Cleaning Done" . Tap the OK button .
Clean
Stopper Strip
facing down .
12