Operating The System - Philips FW 306 Instructions For Use Manual

OPERATING THE SYSTEM

OPTIMAL JAZZ
DSC
DBB
REPEAT SHUFFLE
PROGRAM TIMER
TECHNO ROCK
FW 318C
DIGITAL SOUND CONTROL
CD
STANDBY . ON
DUBBING
TUNING
DUBBING
HIGH SPEED
DUBBING
NORMA• HIGH RECORD REPLAY
SEARCH
Important:
Before you begin operating the system, complete
the preparation procedures.
Demonstration mode
The system has a demonstration mode that shows the
various features offered by the system. Whenever the
system is switched on from the wall socket, the
demonstration mode will start automatically.
Note:
– During demonstration mode, if you press any source
(or standby-on) button, the system will switch to the
respective (or standby) mode.
– When the system is switched to standby mode, 5
seconds later, the demonstration mode will resume.
10
pg 01-22/FW326/22-Eng 10
RDS
STEREO REC DBB
I S
NEWS HSD
REPLAY CLOCK
FM MW LW AM PM MAX
TIMER PROGRAM
MINI HIFI SYSTEM
VOLUME
TUNER TAPE AUX
BAND TAPE 1 • TAPE 2 VIDEO
CLEAR PRESET
PLAY PAUSE PREV NEXT
STOP
To cancel demonstration mode
• Press and hold STOP Ç (on the system only) for 3
seconds to stop the demonstration.
™ The demonstration mode will be switched off
permanently.
™ The system will switch to standby mode.
Easy Set
EASY SET allows you to store all available radio stations
in a particular band (FM, MW or LW) automatically.
• Press and hold STANDBY•ON (on the system only)
for 2 seconds; when the system is in standby or
demonstration mode.
™ "EASY SET" will be displayed and followed by
"TUNER".
™ EASY SET will start with the last active band.
™ All available radio stations with sufficient signal
SURROUND CONTROL
strength will be stored or until 40 presets are filled.
INCREDIBLE SURROUND
Notes :
– When EASY SET is used, all previously stored stations
will be erased.
– The last preset station will appear on the display
when EASY SET is completed.
Switching the system ON
• Press STANDBY•ON (on the system only) , CD,
TUNER, TAPE or AUX.
n
MIC LEVEL Switching the system to standby mode
• Press STANDBY•ON again.
• MAX
™ The system will switch to standby mode.
Selecting the Source
• Press the respective source selection button: CD,
TUNER, TAPE or AUX.
™ The display indicates the selected source.
Note:
– For an external source, make sure that you have
connected the audio left and right OUT terminals of
the external equipment (TV, VCR, Laser Disc or DVD
player) to the AUX IN terminals.
12/9/98, 15:54
3139 116 17531