01
Start by putting the FA in multi-part mode and clearing the sequencer song.
01 Selecting Multi-Part Mode
Typically when performing on the FA, you'll use the tone of part 1 (Single performance). However when using the
sequencer to create a song, you'll use all 16 parts of the studio set (multi-part performance).
1.
Simultaneously press the [SPLIT] and [DUAL]
buttons; multi-part performance mode is
selected.
Selecting a studio set
In this example, we're creating a song using the first
studio set,
"PRST 001: FA Preview,"
for you to specifically select a studio set.
If some other number is selected, select
FA Preview."
02 Clearing the Sequencer Song
Clear the sequencer so that you can create a new song.
1.
Press the [SEQUENCER] button to make it light.
2.
Hold down the [SHIFT] button and press the [3]
(Song Util) button.
Preparing to Create a Song
so there's no need
"PRST 001:
3
[SHIFT]
Hold down the
button
and ...