Where To Find Information - HP Vectra VL Familiarization Manual

Component
Communication ports 2
Mass storage
Flexible disk drive
Power supply
Vectra Products Overview
HP Vectra VL 7/xxx PC
USB connectors, 1
3.2 GB IDE or 4.3 GB IDE
5 shelves (3 front access, 2 internal)
Standard version without bezel
Auto-ranging 100/240 VAC or
Manually switched 115/230 VAC
170 W input, 120 W output
1
Manually switched power supply to be introduced approximately 2 months
after product launch.

Where to find information

For more information, refer to the Hewlett-Packard MIS Kit for this product,
available at the HP World Wide Web site:
http://www.hp.com/go/vectrasupport/
The MIS kit for this PC includes:
• User's Guide — Setting up information for the PC.
• Exploring Your PC — describes the basic parts of the PC and how to op-
timize performance.
• Upgrade and Maintenance Guide — describes in detail how to open the
package and install accessories. It also has detailed troubleshooting infor-
mation.
• Network Administrator's Guide — network driver installation information
for network administrators.
• Service Handbook Chapters — information on upgrade and replacement
parts, including HP part numbers. Beep codes are explained in an Appen-
dix of the HP Vectra Service Handbook (12th Edition).
4
HP Vectra VL 7/xxx MT PC
serial port, 1 parallel port, keyboard, mouse
4.3 GB IDE or 6.4 GB IDE
6 shelves (4 front access, 2 internal)
Standard version with bezel
Auto-ranging 100/240 VAC or
1
, Manually switched 115/230 VAC
220 W input, 150 W output
1
,