Samsung SDE-120N User Manual page 18

connecting with other device
Total System Confi guration
You can use the 10/100 Mbps Ethernet connector on the product to connect to the network.
Connecting to the network enables you to perform various functions including remote monitoring, remote
search and remote control.
DIGITAL VIDEO RECORDER
DVR
1. Connect LAN cable of Cable/ADSL modem or Direct Fixed/Static IP LAN Line to WAN port of IP Router.
2. Connect LAN ports of IP Router to Ethernet port DVR to be set up and to Ethernet port of Local PC to use
during setup.
3. Connect Video cable of Camera to Monitor.
4. Turn on the Monitor power.

If you have a Static (Fixed) IP line or Dynamic IP line (Cable Modem or ADSL Modem) with one IP address (whether it's
dynamic or fixed), but have more than one internet device to use (such as a PC and a DVR or several DVRs): you must
use an IP Router (different from a simple Network Hub); You must set up the Router to work with the DVR and you must
use a network capable PC within The local Router network to do the setup.

If you are using an existing Router which is already set up, you may not need to redo the basic setup of the Router
again, but it is highly recommended that you at least read all the instructions below and go through the steps. Whether
you are using an existing Router or a new Router, you must go through the Port Forwarding portion of the setup.
18_ connecting with other device
IP Router or HUB Cable/ADSL Modem
Direct LAN (Fixed/Static IP)
POWER ALARM REC NETWORK
DISPLAY SEARCH MENU
Local PC #1
Lo-Call 1890 866 900
INTERNET
or
POWER ALARM REC NETWORK
DIGITAL VIDEO RECORDER
DISPLAY SEARCH
DVR
Local PC #2 External Remote PC #1
DDNS Server
(websamsung.net)
MENU
External Remote PC #2
www.cctvireland.ie