Samsung SDE-120N User Manual page 15

Adjusting the Camera Bracket
1. Choose an installation site that can sufficiently support the weight of
the equipments to be installed.
2. Attach the camera bracket to the wall using the supplied screws
(M4 × L15). 4×15 sized screws wall or ceiling.
3. Adjust the camera to target the video location and tighten the camera
bracket handle on the camera bracket. Install the camera on to the male
screw of the camera bracket by rotating the camera in clockwise.
4. Loosen the handle by turning it in counter clockwise direction and then
adjust the camera position. Tighten the handle, turning it clockwise, and
lock the camera in position.
5. Connect the camera cable to the camera.
Lo-Call 1890 866 900
Handle
English _15
www.cctvireland.ie