Table of Contents
Advertisement
History Filter
This dialog selects the classes of events will be recorded (sent to) specific output devices. The Select
Destination box will select History screen, Printer, History files and System serial ports. Notice when this
selection is changed the checked items also change. There is a different set of events to be output for each
destination selected. Therefore for each destination the events to be output must be individually configured.
"History Screen"
This option selects the events that will be displayed on the computer screen when "Show History" above is
selected.
"Printer"
This option selects the events that will be sent to the printer.
"History Archive File A"
This option selects the events that will be sent to the a_audit.txt file stored in the Escort sub-directory (typically
C:\escort\a_audit.txt ). There is a minimum set of events that can't be disabled, so they will always be recorded.
"History Archive File B"
This option selects the events that will be sent to the b_audit.txt file stored in the Escort sub-directory (typically
C:\escort\b_audit.txt ).
"System Serial Port 1"
This option selects the events that will be sent to the System Serial Port 1. System Serial Port 1 is assigned a
physical Comm Port in the "Remote Comm Port Setup" dialog and its function must be set to "History Filter
Output" in the "Remote Setup" dialog.
History Filter Dialog
Security Escort Training
Page 114 of 142
Advertisement
Table of Contents
