Setting The Rings To Answer; Setting The Incoming Message Or Memo Length; Setting The Recording Quality - RCA 1114 User Manual

Setting the Rings to Answer

This setting allows you to set the number of rings before the unit answers a
call. You can choose from 2-8 or Toll Saver (see "Toll Saver.")
1. Press and release the MENU button. The screen displays RING TO ANSWER.
The unit announces, Setup Menu . Use SKIP to change setting. Press MENU
to save a setting.
2. Use SKIP or REPEAT for the desired setting (2-8, Toll Saver).
3. when fininshed,press MENU to confirm.
NOTE: To skip to the next setting, press MENU. To exit setup, press
EXIT.
Toll Saver
Toll Saver can save you the cost of a call when you access your messages
from another phone:
• If you have new messages, the unit answers after the 3rd ring.
• If you have no new messages, the unit answers after the 5th ring.
You can hang up after the 3rd ring and save the pay telephone or long
distance charge.

Setting the Incoming Message or Memo Length

This setting allows you to set the maximum length of time allowed for a single
ncoming message or memo. You can choose from 1 minute to 4 minutes.
1. Press and release the MENU button until the screen displays MESSAGE
LENGTH.
2. Use SKIP or REPEAT for the desired setting.
3. When finished, press MENU to confirm.
NOTE: To skip to the next setting, press MENU. To exit setup, press
EXIT.

Setting the Recording Quality

This setting allows you to set the recording quality between standard (STD)
and long play (LONG). Long play will give more recording time than standard.
1. Press and release the MENU button until the screen displays REC
LONG.
2. Use SKIP or REPEAT or select the desired setting.
3. Press MENU to confirm setting and go to next setting

: STD