Troubleshooting; Mcs-200 Troubleshooting - HP MCS-200 User Manual

Troubleshooting

MCS-200 troubleshooting

Issue
The water flow is low or not flowing. For more information, see the "Temperature Control settings" section
The fan speed is too low.
The fan speed is too high.
The average server intake
temperature (air going to the servers)
is too high.
The average server intake
temperature (air going to the servers)
is too low.
The average exhaust temperature
(air coming out of the servers) is too
high.
The average exhaust temperature
(air coming out of the servers) is too
low.
The settings that have been modified
through the web interface are not
accepted, and the management
module LED is blinking red, yellow,
or green.
The measurement readings on the
management module display or web
interface seem to be incorrect, and
the management module LED is
blinking red, yellow, or green.
The heat exchanger unit stops
operating correctly.
Resolution
in the HP Modular Cooling System 200/100 Web Interface User
Guide located on the Documentation CD included with this product.
For more information, see the "Cooling performance parameters"
section in the HP Modular Cooling System 200/100 Web Interface
User Guide located on the Documentation CD included with this
product.
For more information, see the "Cooling performance parameters"
section in the HP Modular Cooling System 200/100 Web Interface
User Guide located on the Documentation CD included with this
product.
For more information, see the "Cooling performance parameters"
section in the HP Modular Cooling System 200/100 Web Interface
User Guide located on the Documentation CD included with this
product.
For more information, see the "Cooling performance parameters"
section in the HP Modular Cooling System 200/100 Web Interface
User Guide located on the Documentation CD included with this
product.
For more information, see the "Cooling performance parameters"
section in the HP Modular Cooling System 200/100 Web Interface
User Guide located on the Documentation CD included with this
product.
For more information, see the "Cooling performance parameters"
section in the HP Modular Cooling System 200/100 Web Interface
User Guide located on the Documentation CD included with this
product.
Press and hold the management module C key for five seconds to
confirm these settings.
Press and hold the management module C key for five seconds to
confirm these settings.
Remove the corresponding fan unit to keep the Automatic Door
Release Kit from holding the rack doors open.
Troubleshooting 56