Overview; Introduction - HP MCS-200 User Manual

Overview

Introduction

The HP Modular Cooling System 200 is an air and water heat exchanger that removes high levels of excess
heat generated by equipment installed in HP racks. The installed equipment takes in cold air through the front
of the closed MCS-200 and uses the air for internal cooling. After the air has been warmed, the MCS-200
expels the air through the rear vents.
HP provides several components to complement or complete your MCS-200. For more information, see the
HP Modular Cooling System 200/100 Options Installation Guide.
The following illustrations include optional components.
Unit side view
Item Reference
Condensation pump
1
Condensation pump controller
2
Overview 5