Configuring The Ip Network Settings Automatically Or Manually; Table 3-4 Ip Network Device Setting Options - Honeywell HD4 EQUIP Series User Manual

Configuring the IP Network Settings Automatically or Manually

Option Description
Device Name By default, the device name is the device type plus the MAC Address. Honeywell
recommends, for security, that you change the device name.
IP Address The IP address of the device on the network. The camera obtains an IP address by static or
dynamic (automatic) means. There are two options: DHCP (dynamic), assigned by the user,
or APIPA (static), assigned by the network.
Subnet Mask The subnet mask, or netmask, value of the device on the network. IP networks can be
divided into several smaller networks by subnetting. When a network is subnetted, you must
specify a subnet mask, which tells network devices which smaller network they belong to.
Note
Default Gateway The default gateway address that connects the device to the network. Enter the IP address
of the host to use as a gateway between networks. The gateway allows communication
between devices that are on different networks. Without a correct gateway setting, the
camera cannot receive or transmit data from or to devices that are not in the same network
address range.
MAC Address The MAC address is a factory-assigned address that is unique for each device.
Document 800-05620 Rev C
04/10
Note When you see the Limited/No connectivity
connect to the device because the discovered device is on a different subnet
from your PC. Check your network settings for both the device and your PC to
resolve this issue. Consult your network administrator for additional support.
The IP network setting details, such as device name, IP address, and subnet mask can be
configured for each connected device either automatically or manually.
Note It is important to click Apply to save any configuration change.
Table 3-4 IP Network Device Setting Options
If the subnet mask is not properly configured, the camera might not be able to
communicate with other devices on the network.
HD4 EQUIP Series IP Dome Cameras User Guide
button, you cannot fully
39