Start The Programme; Store The Programme; At The End Of The Programme - Zanussi FL 12 Instruction Booklet

Washing machine fl 12
Hide thumbs Also See for FL 12:
Table of Contents

Advertisement

11. Start the programme

To start the selected programme, press the
START/PAUSE button; the display stops
flashing and the door pilot light comes on to
indicate that the door locking device is engaged.
The programme starts after about 30 seconds.

12. Store the programme

The wash programme selected can now be
1
2
3
4
stored by pressing one of the MEMORY buttons
until the corresponding pilot light comes on.

13. At the end of the programme

The machine stops automatically and three
flashing zeros are displayed.
The programme which has just been completed
is still in the memory and the corresponding pilot
lights stay on.
If the RINSE HOLD option has been selected,
the corresponding pilot light flashes to indicate
that the water must be emptied out before
opening the door.
The machine is fitted with a safety device that
prevents opening of the door for about 2-3
minutes after the end of the programme. The
door can only be opened after the door locked
light has gone out.
Release of the lock is indicated by an audible
signal as well as the pilot light going out.
Switch the machine off by pressing the ON/OFF
button.
Remove the laundry from the drum and carefully
check that the drum is empty so as to avoid any
forgotten items being damaged in a subsequent
wash (e.g. shrinking) or their colour running into
a load of whites.
If you do not intend to carry out another wash,
close the water tap.
Leave the door open to prevent the formation of
mildew and unpleasant smells.
18

Advertisement

Table of Contents
loading

Table of Contents