Table of Contents
Advertisement
Using your appliance
Loading your appliance
Before placing dishes in the machine, remove any
scraps of food, to avoid clogging the filters and
consequently reducing the performance.
Do not load very small items which can
fall through the baskets.
The lower basket
The lower basket is designed to take saucepans,
lids, plates (up to 27 cm in diameter), salad bowls,
cutlery etc.
Serving dishes and large lids should be arranged
around the edge of the basket, ensuring that the
upper spray arm can turn freely.
The two rear rows of prongs on the lower basket
can be easily lowered to allow you to load pots,
pans and bowls.
To lower the prongs:
- Slightly pull them upward and let them drop
down (see picture).
- To bring them back to the standing position, just
pull them up again.
The cutlery basket
Long bladed knives stored in an upright
position are a potential hazard.
Long and/or sharp items of cutlery such
as carving knives must be positioned
horizontally in the upper basket.
Take care when loading or unloading
sharp items such as knives.
Cutlery should be placed in the removable cutlery
basket with the handles facing downwards. If the
handles protrude from the bottom of the basket,
obstructing the lower spray arm, load the cutlery
with the handles facing upwards.
Mix spoons with other cutlery to prevent them from
sticking together.
Teaspoons may be loaded into the special slots
provided in the cutlery basket handle.
The cutlery basket is in two parts which can be
seperated to give greater loading flexibility. To
separate the two parts, slide them horizontally in
opposite directions and pull them apart. To
reassemble, reverse the procedure.
UI22
UI21
UI18
UI07
39
PBA29/1GB
Advertisement
Table of Contents
