Suspending Zx1 Loudspeakers - Electro-Voice Zx1-Sub Owner's Manual

Suspending Zx1 Loudspeakers

Electro-Voice Zx1 loudspeakers may be safely suspended with single stud fittings by using the MP1 suspension kit, or quickly
attached to a truss by using the CA-Zx truss clamp adaptor (both sold seperately). See MP1 or CA-Zx instruction sheets for
proper assembly and use.
WARNING:
MP1-B Mounting Plate Accessory
8
Suspending any object is potentially dangerous and should only be attempted by individuals
who have a thorough knowledge of the techniques and regulations of rigging objects
overhead. Electro-Voice strongly recommends that Zx1 speakers be suspended taking
into account all current national, federal, state and local regulations. It is the responsibility
of the installer to ensure that Zx1 speakers are safely installed in accordance with all such
regulations. If Zx1 speakers are suspended, Electro-Voice strongly recommends that the
system be inspected at least once a year. If any sign of weakness or damage is detected,
remedial action should be taken immediately. There are instruction sheets for each EV
Suspension and Array Kit that should also be consulted prior to suspending speakers.
Figure 3: Figure 4:
CA-ZX Truss Clamp Accessory
Electro-Voice Zx1 Series Owner's Manual