Suspending Zxa1 Loudspeakers - Electro-Voice ZxA1-90 Owner's Manual

Suspending ZxA1 Loudspeakers

Electro-Voice ZxA1 loudspeakers may be safely suspended with single stud fittings by using the MP1 suspension kit, or quickly
attached to a truss by using the CA-Zx truss clamp adaptor (both sold seperately). See MP1 or CA-Zx instruction sheets for
proper assembly and use.
WARNING:
MP1-B Mounting Plate Accessory
8
Suspending any object is potentially dangerous and should only be attempted by individuals
who have a thorough knowledge of the techniques and regulations of rigging objects overhead.
Electro-Voice strongly recommends that ZxA1 speakers be suspended taking into account
all current national, federal, state and local regulations. It is the responsibility of the installer to
ensure that ZxA1 speakers are safely installed in accordance with all such regulations. If ZxA1
speakers are suspended, Electro-Voice strongly recommends that the system be inspected at
least once a year. If any sign of weakness or damage is detected, remedial action should be
taken immediately. There are instruction sheets for each EV Suspension and Array Kit that should
also be consulted prior to suspending speakers.
Figure 3: Figure 4:
CA-ZX Truss Clamp Accessory
Electro-Voice ZxA1 Series Owner's Manual