Download Print this page

GE EPS 601 User Manual page 12

Electrophoresis power supply

Advertisement

3 Unpacking and installation
12
Local regulation for Great Britain
WARNING IMPORTANT
This appliance must be earthed.
The wires in the mains lead are coloured in accordance with the following code:
Green and yellow
Blue
Brown
If the plug provided is unsuitable for socket outlets, the plug must be cut off and
suitable plug fitted. The cut-off plug should be disposed of and must not be inserted
into any 13 amp socket as this can result in electric shock. The plug or adapter or
the distribution panel should be provided with 13 amps fuse. As the colours of the
wires in the mains lead of this appliance may not correspond with coloured markings
identifying the terminals in your plug, proceed as follows:
The green and yellow wire must be connected to the terminal in the plug which is
marked with the letter E or by the earth symbol, or coloured green, or green and
yellow.
The blue wire must be connected to the terminal which is marked with the letter N or
coloured black.
The brown wire must be connected to the terminal which is marked with the letter L
or coloured red.
NOTE: After replacing or changing a fuse, the fuse cover in the plug must be
replaced with a fuse cover which corresponds to the colour of the insert in
the base of the plug or the word that is embossed on the base of the
plug, and the appliance must not be used without a fuse cover. Only 13 Amps
fuse approved to B.S. 1362 A.S.T.A. should be used.
Switch on the power. Each time the instrument is turned on a self diagnostic test is
done. If an error is detected during the test a message will appear on the display and
an alarm will sound.
Electrophoresis Power Supply EPS 601 User Manual 18-1130-19 Edition AD
Earth
Neutral
Live

Hide quick links:

Advertisement

loading