Drive Guard; V-Belt Holders; Spark Plug Holders; Carburetor Heating Lever - Yamaha MM700H Owner's Manual

ESU00052

Drive guard

The drive guard is designed to cover the V-belt clutch
and V-belt in case parts break or come loose.
WARNING
G
Make sure that the drive guard is tightened
securely before operating the snowmobile.
G
Never run the engine with the V-belt or drive
guard removed.
@
ESU00053

V-belt holders

Keep a spare V-belt for emergency use by placing it into
the V-belt holders provided.
CAUTION :
@
Make sure that the V-belt is installed securely in the
holders.
@
ESU00056

Spark plug holders

Keep spare spark plugs for emergency use by placing
them into the spark plug holders provided.
ESU00057

Carburetor heating lever

The carburetor heating lever controls the flow of coolant
through each carburetor body.
Make sure that the lever is in the "ON" position to heat
the carburetors while the ambient temperature is below
0 °C (32 °F).
1 Carburetor heating lever
2 "ON"
3 "OFF"
CAUTION :
@
When operating the snowmobile above 0 °C (32 °F),
move the carburetor heating lever to the "OFF" posi-
tion, since the carburetors do not need to be heated.
@
5-10