Control functions
ESU13032
Shift lever
The shift lever is used to put the snowmobile
into forward or reverse. Before shifting, wait
for the snowmobile to come to a complete
stop with the engine idling. Pull the shift lever
out, slide it to "FWD" or to "REV" until it stops,
and then push it back in.
1
1. Shift lever
1. Pull out.
2. Slide to "FWD" (forward).
3. Push in.
18
1. Pull out.
2. Slide to "REV" (reverse).
3. Push in.
ECS00072
NOTICE
Do not use the shift lever while the snow-
mobile is moving, otherwise the drive train
could be damaged.
ESU12735
Drive guard
EWS00402
WARNING
Coming in contact with the rotating V-
G
belt or clutch parts can cause severe in-
jury or death. Never run the engine with
the drive guard removed.
Make sure that the drive guard is in-
G
stalled securely before operating the
snowmobile to protect against severe
injury or death from a broken V-belt or
other part should it come off the snow-
mobile while it is in operation.
ECS00830
NOTICE
Never run the engine with the V-belt re-
moved. Clutch components can be dam-
aged.
The drive guard is designed to protect the V-
belt clutch and V-belt in case parts break or
come loose.