Yamaha MM700H Owner's Manual page 66

A B
3. Pull up the dipstick and check that the oil is between
the upper and lower levels. If not, add oil to the upper
level.
2 Upper level
3 Lower level
Drive chain oil: API GL-3
SAE 75 or 80
È For models without reverse transmissions
(MM700)
É For models with reverse transmissions
(VT700)
CAUTION :
@
Make sure that no foreign material enters the drive
chain housing.
@
4. Reinstall the dipstick and fit the loop 4 of the dipstick
handle onto the projection 5 of the gear case.
Chain tension adjustment
1. Loosen locknut.
2. Turn the adjuster bolt clockwise until it is finger tight.
3. Hold the adjuster bolt in place while tightening the
chain adjuster locknut.
1 Locknut
2 Adjuster bolt
8-15