Routing - Asus DSL-X11 User Manual

Assign Differentiated Service Code Point (DSCP) Mark: Select a mark
service that modifies the original packet IP header if all rules defined within
the classification class are matched. (CS - Mark IP Precedence, AF -
Assured Forwarding, EF - Expedited Forwarding)
Mark 802.1p if 802.1q is enabled: Select an 802.1p priority number that
serves as the 802.1p value.
There are two sets of classification rules. Set-1 is based on different fields within
TCP/UDP/IP layer plus physical LAN port; Set-2 is based on MAC layer IEEE
802.1p priority field.
Set-1 Rules contain the following:
Protocol: Select one among TCP/UDP TCP UDP or ICMP protocols.
Set-2 Rules contain the following:
802.1p priority: The 802.1p header includes a 3-bit prioritization field,
which allows packets to be grouped into eight levels of priority (0-7), where
level 7 is the highest one.
3.4.6

Routing

3.4.6.1 Routing – Default Gateway
In this page, you can modify the Default Gateway settings.
If the Enable Automatic Assigned Default Gateway checkbox is selected, this
router accepts the first received default gateway assignment from one of the
PPPoA, PPPoE or MER/DHCP enabled PVC(s). If the checkbox is not selected,
enter the static default gateway and/or a WAN interface. Click Save/Apply to
save it.
Note:
After changing the Automatic Assigned Default Gateway from unselected
to selected, you must reboot the router to obtain the automatic assigned
default gateway.
DSL-X11 User Manual
57