Table of Contents
Advertisement
DSL-N13 Wireless ADSL 2/2+ Modem Router User Manual
Setting up routing protocol - RIP
RIP stands for Rounting Information Protocol. DSL-N13 supports RIPv1 and RIPv2.
1. Click Advanced Setup -> Routing -> RIP to open the configuration page.
2. To activate RIP, select Enabled radio button for global RIP mode.
3. To configure an individual interface, select the desired RIP version and operation
and check the Enabled checkbox for the interface.
4. Press Save/Apply to save and activate the settings.
42
Advertisement
Table of Contents
