Yamaha VX250A Owner's Manual page 33

Table of Contents

Advertisement

YAMAHA
SPEED
Km/h
knot
mph
km
mile
TRIP
TIME
BATT
set
mode
YAMAHA
SPEED
Km/h
knot
mph
km
mile
TRIP
TIME
BATT
set
mode
EMU01274
Trip Meter
This meter displays the distance the boat
has traveled since the meter was last reset.
Repeatedly push and release the "mode"
button until the indicator on the face of the
meter points to "TRIP". To reset the trip
meter to "0", press the "set" and "mode" but-
ton together.
000331
NOTE:
8 The trip distance is shown in kilometers
or miles depending upon the unit of mea-
surement selected for the speedometer.
8 The trip distance is kept in memory by
battery power. The stored data will be lost
if the battery is disconnected.
EMU01275
Clock
This meter shows the current time.
Repeatedly push and release the "mode"
button until the indicator on the face of the
meter points to "TIME." To set the clock, be
sure the meter is in the "TIME" mode. Press
the "set" button; the hour display will begin
blinking. Press the "mode" button until the
000332
desired hour is displayed. Press the "set"
button again, the minute display will begin
blinking. Press the "mode" button until the
desired minute is displayed. Press the "set"
button again to start the clock.
NOTE:
The clock operates on battery power.
Disconnecting the battery will stop the
clock. Reset the clock after connecting the
battery.
2-12
E

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents