Yamaha VX250A Owner's Manual page 104

q
w
N
ON
START
If the engine fails to start, use the following
procedure.
1) Adjust the trim angle so that the engine
is vertical or trimmed in.
000621
2) Disconnect the Yellow/White emer-
gency connector to bypass the ignition
timing advance circuit of the microcom-
puter.
1 CDI unit
2 Yellow / White cord
216016
3) Open the throttle slightly without shift-
ing using the neutral throttle lever or the
free accelerator.
After the engine starts, return the throt-
tle to the original position.
701014
4) Be sure the engine is in Neutral and
that the lanyard is attached to the
engine stop switch. The main switch
must be on.
5) Start the engine.
000978
5-9
E