Replacing A Headlight Bulb - Yamaha FZ1 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR

Replacing a headlight bulb

This model is equipped with two quartz
bulb headlights. If a headlight bulb
burns out, replace it as follows.
1. Remove panel B. (See page 6-9.)
2. Disconnect the headlight coupler,
and then remove the bulb cover.
6
1. Headlight bulb cover
2. Headlight coupler
3. Unhook the headlight bulb holder,
and then remove the defective
bulb.
EAU23730
1. Headlight bulb holder
WARNING
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
CAUTION:
Take care not to damage the follow-
ing parts:
6-35
G
Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transpar-
ency of the glass, the luminosity
of the bulb, and the bulb life will
be adversely affected. Thor-
oughly clean off any dirt and fin-
gerprints on the headlight bulb
using a cloth moistened with al-
cohol or thinner.
EWA10790
G
Headlight lens
Do not affix any type of tinted
film or stickers to the headlight
lens.
Do not use a headlight bulb of a
wattage higher than specified.
ECA10650
1. Do not touch the glass part of the bulb.