807-013
Chain Tension Adjustment
1. Remove the cap and measure the chain deflection by
pushing the chain by finger.
1 Cap
Standard chain deflection 2:
8 ~ 15 mm (0.3 ~ 0.6 in)
If the deflection exceeds specification, adjust the chain
tension.
2. Loosen the locknut.
3. Turn the adjuster bolt in or out until proper chain
deflection is achieved.
3 Locknut
4 Adjuster bolt
4. Tighten the locknut.
5. Install the cap.
ESU00176
BRAKE/PARKING BRAKE
Checking Pad Wear
Check pad wear by measuring the thickness of the brake
pad.
If the pad reaches the wear limit, consult a Yamaha dealer
for replacement.
818-028
Wear limit 1: 9.5 mm (0.37 in)
Adjustment
This machine has a self-adjusting brake caliper. No adjust-
ment is necessary under normal conditions. If free play at
the brake lever is incorrect, consult a Yamaha dealer.
WARNING
Be sure this adjustment is serviced by a Yamaha
dealer.
8-14