Basic Operation; Telephone Operation; Handset Operation - VTech Cordless Telephone Manual

Telephone Operation

/ CID
• While on a call, press to
decrease the volume. A
double beep will sound
when you reach the mini-
mum setting.
• While phone is not in use,
press to display caller ID in-
formation.
• While entering number or
letters, press to delete last
character entered.
PHONE ( ) / FLASH
• To make a call, press then
dial the number. or dial the
number (use < to back-
space and correct digits),
then press PHONE/FLASH
)
(
• During a call, press to re-
ceive an incoming call, if
Call Waiting is activated.
• To answer a call, press this
or any key except OFF.
• If you have call waiting ser-
vice, you will hear a beep
if someone calls while you
are on a call. Press
DIAL/PAUSE to put the first
call on hold and take the
new call. Press again to
switch back and forth be-
tween the calls.
HOLD
• Press to put a call on hold.
Press again or press
PHONE to release hold.
-OR-
• Use the extension to pick
up the call.
CHAN/ DELETE
• Press to switch to a clear
channel while on a call.
• When viewing the call log,
press to delete the current
record displayed.
• While handset is in idle
mode,press and hold to de-
lete all records in the call log.
RE-
9
SELECT
• Use SELECT in conjunction
with PROG during handset
programming.
• While on a call, press to
transfer the call to the other
handset.
• While on a call, press to in-
crease the volume. A double
beep will sound when you
reach the maximum setting.
• While phone is not in use,
press to display phonebook
entries.
• While entering letters, press
to advance cursor.
• Press to end a call, or place
handset in base or charger.
• While under program ming,
press to exit.
• While under paging,press to
cancel.
REDIAL/PAUSE
• To call last number dialed,
press REDIAL/PAUSE, then
press PHONE/FLASH
• Press PHONE/FLASH
then press REDIAL/PAUSE.
• To delete the last number di-
aled record, press twice while
handset is idle.
• While entering numbers,
press REDIAL/ PAUSE to in-
sert a dialing pause.
• Press to enter programming
mode with handset idle (on
hook).
/
OFF
. or
,
PROG