VTech Analog Contemporary Series Master User Manual
Cordless 1-line hotel phone, cordless accessory handset and charging base
Hide thumbs
Also See for Analog Contemporary Series:
- Master user manual (31 pages) ,
- User manual (41 pages) ,
- User manual (98 pages)
Related Manuals for VTech Analog Contemporary Series
Summary of Contents for VTech Analog Contemporary Series
- Page 1 Analog Contemporary Series CTM-A2415 Cordless 1-line Hotel Phone CTM-A2415HC Cordless Accessory Handset and Charging Base Master User ‘s Guide...
-
Page 2: Important Safety Instructions
Important safety instructions When using your telephone equipment, basic safety precautions should always followed to reduce the risk of fire, electric shock and injury, including the following: 1. This product should be installed by a power cord. Do not install this product qualified technician. - Page 3 restore the product to normal operation. instructions. • If the product has been dropped and the 20. In wall mounting position, make sure to telephone base and/or handset has been mount the telephone base on the wall by damaged. aligning the eyelets with the mounting studs of the wall plate.
- Page 4 flammable liquid or gas. • For pluggable equipment, the socket- outlet (power adaptor) shall be installed near the equipment and shall be easily accessible; • The equipment is only use for mounting at height <2M; and • The applied nameplate is located at the bottom.
-
Page 5: Table Of Contents
Cordless Accessory Handset & Charging stand - CTM-A2415HC Appendix 19 CTM-A2415 Base backup battery 19 CTM-A2415HC Handset battery 19 Appendix 20 Troubleshooting Appendix 27 VTech Hospitality Limited Warranty Program Appendix 29 Energy-saving charging mode 29 Maintenance 29 Disclaimer and Limitation of Liability EN - 5... -
Page 6: Parts Check List
Parts check list Items contained in the respective cordless telephone package: Parts included Model Model Base Telephone base Telephone name number Cordless handset Stand with faceplate line cord Power and Handset | Wall and overlay | with Power adapter battery Mount Charging Base connector... -
Page 7: Telephone Layout
Telephone layout Cordless 1-line CTM-A2415 Base MESSAGE WAITING LED Wall mount clip Faceplate slot with Speed dial keys (Programmable) SPD5 SPD6 SPD7 SPD8 REPLACE BATTERY LED VOL + | VOL - (VOLUME +/-) SPEAKER CHARGE LED FIND HS (FIND HANDSET) Grooves for Mounting bracket Voicemail voltage detection Battery compartment with cover... -
Page 8: Cordless 1-Line Ctm-A2415 And Ctm-A2415Hc Handset
Cordless 1-line CTM-A2415 and CTM- A2415HC Handset TALK | FLASH Speakerphone MESSAGE WAITING LED Numeric dial keys SPEAKER *Design is subject to change without prior Speed Dial keys (Programmable) notice. SPD1 SPD2 Handset battery ON pinhole Handset earpiece EMERGENCY (Programmable) MESSAGES (Programmable) MUTE... -
Page 9: Cordless 1-Line Ctm-A2415Hc Charging Stand
Installation Cordless 1-line CTM-A2415HC Charging Stand Cordless 1-line - CTM-A2415 Installation option - install base stand for desktop To mount the base stand 1. Align the grooves with the base stand. 2. Slide down to secure the stand. Charging poles CHARGE LED To unmount the base stand Simply slide up and lift the telephone base... - Page 10 Installation option - converting from desktop to wall mount position To mount the telephone base on the wall 1. Unmount the base stand. Put the cordless handset aside. On the telephone base, press the wall mount clip upward and rotate a half turn (180°).
- Page 11 Replace telephone base battery Replace a handset battery installation installation The telephone base battery is pre-installed. To The handset battery is pre-installed. To replace replace the telephone base battery, follow as the handset battery, follow as shown below. shown below. 1.
-
Page 12: Connection
4. To replace the handset cover, align all base when not in use. the tabs on the handset cover against the 4. Press SPEAKER on the telephone base. corresponding grooves on the handset, Listen for a dial tone, and then press SPEAKER then firmly push downward until all the tabs again to hang up. -
Page 13: Cordless Accessory Handset & Charging Stand - Ctm-A2415Hc
Cordless Accessory Handset & Charging Handset registration stand - CTM-A2415HC Place the cordless handset on the telephone base cradle. Handset registration happens automatically the first time a cordless handset is Charger base installation placed on the telephone base. The telephone comes ready for desktop use. When the registration process completes, the MESSAGE WAITING LED flashes once and you 1. -
Page 14: Set Up
Set up Cordless 1-line - CTM-A2415 Cordless Accessory Handset & Charging stand - CTM-A2415HC Program phone settings In order to program different telephone settings, you have to enter ADMIN mode during system idle by pressing *7764#MUTE on the handset. You will hear 3 rising beeps as confirmation. •... - Page 15 Ringer tone to select the desired RF transmission power control level. You hear 3 rising beeps as There are 3 ringer tone options that can be confirmation. assigned to the telephone base. Voicemail voltage detection To change the ringer tone There are several voicemail voltage detection 1.
- Page 16 To change the voicemail voltage detection To program a Speed Dial key by the Panasonic detection method 1. Press *234636#MUTE on the handset to enter SPEED DIAL PROGRAMMING mode. You 1. Press *7764#MUTE on the handset to enter hear 3 beeps while MUTE key (on handset) and ADMIN mode.
-
Page 17: Operation
Operation Answer a call using the telephone base / SPEAKER. On the telephone base, press Cordless 1-line - CTM-A2415 • The / SPEAKER key illuminates when in Cordless Accessory Handset & Charging use. stand - CTM-A2415HC Place a call Using the cordless handset and the telephone base Place a call using the cordless handset The cordless handset and the telephone... - Page 18 • To switch a call from the telephone base Volume speakerphone to the cordless handset Listening volume can be adjusted on the which is not on the telephone base cradle, cordless handset and the telephone base. press TALK or / SPEAKER on the cordless handset.
-
Page 19: Appendix
Find handset CTM-A2415HC Handset battery It takes up to 12 hours for the battery to be Use this feature to find all registered fully charged. When it is fully charged, you can cordless handsets. expect the following performance: Start paging Operation Operating time Press FIND HS (FIND HANDSET) on the... -
Page 20: Appendix
Appendix Troubleshooting If you have difficulty with the telephones, please try the suggestions below. For customer service, visit our website at www.vtechhotelphones.com or call 1-888-907-2007. For cordless telephone Question Suggestions • Make sure the power adapter is securely plugged into an outlet not controlled by a wall switch. - Page 21 Question Suggestions • Try all the above suggestions. • Make sure there is a dial tone before dialing. It is normal if the cordless handset takes a second or two to synchronize with the telephone base before producing a dial tone.
- Page 22 Question Suggestions • Make sure the cordless handset is placed in the telephone base or charging base correctly. The CHARGE LED should be on. • Remove the battery and then install it again. Charge it for up to 12 hours. •...
- Page 23 Question Suggestions • Make sure the telephone line cord and the power adapter are plugged in properly (page 13-14). • The cordless handset may be too far from the telephone base. Move it closer to the telephone base. • Adjust the setting of RF transmission power (page 16).
- Page 24 Question Suggestions • Make sure the power cord is securely plugged into the telephone base. Plug the telephone base into a different working electrical outlet not controlled by a wall switch. • Move the cordless handset closer to the telephone base or adjust the setting of RF transmission power (page 16).
- Page 25 Question Suggestions • Move the handset closer to the telephone base or adjust the setting of RF transmission power (page 16). It may be out of range. • If there is High Speed Internet Access (HSIA) available at the premises through a telephone line, you may need to install a DSL filter (DSL - digital subscriber line) between the telephone line cord and the telephone...
- Page 26 Question Suggestions • If other telephones in your hotel are having There is interference during a telephone the same problem, the problem is in the conversation, or the call fades in and out when wiring or telephone service. Contact your I am using the cordless handset.
-
Page 27: Appendix
During the limited warranty period, VTech’s authorised service representative will repair or replace, at VTech’s option, without charge, a Product that is not free from defects in materials and workmanship. If VTech’s authorised service representative repairs the Product, new or refurbished replacement parts may be used. - Page 28 If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, VTech will notify you and will request that you authorize the cost of repair and return shipping costs for the repair of Products that not covered by this limited warranty.
-
Page 29: Appendix
Appendix To deactivate the energy-saving charging mode: Energy-saving charging mode Unplug the telephone base adapter from the When this mode is activated, all telephone power outlet. Then plug the telephone base functions, except handset battery charging, will power adapter and the telephone line cord be disabled. -
Page 30: Disclaimer And Limitation Of Liability
VTech and the environment. Telecommunications Ltd. and its suppliers assume no responsibility for any damage or... -
Page 31: Technical Specification
Handset: 1.89 x 8.27 x 1.57 in (48 x 210 x 40 mm) Charging stand: 2.76 x 3.78 x 4.17 in (70 x 96 x 106 mm) Manufacurer VTech Telecommunications Limited; Address: 23/F.,Tai Ping Industrical Centre,Block 1,57 Ting Kok Road Tai Po, HONG KONG Importer Refer and contact local importer/ distributor... - Page 32 Specifications are subject to change without notice. VTech Telecommunications Inc. All rights reserved. 10/20. Near Terms Cordless_CTM2415-2415HC_CEC_AUS_201029...