Telephone Memory; Store A Number And Name In Memory - VTech t 2429 Manual

Telephone Memory

Your t 2429 cordless phone can store 9 telephone numbers with names (up to 15
characters for the name and 24 digits for the number for each location) in memory
locations you assign (1 through 9).
NOTES:The entries you stored in speed dial memory will be marked with 01 through
09 in the telephone directory.
Press OFF at any time to exit memory dial mode.

Store a Number and Name in Memory

1. Press PROG on the handset.
2. Press or
3. Press SELECT. The screen displays
4. Press the key (1 through 9) for the memory location where you're storing this
entry. If the selected location is empty, the screen displays
NOTE: Take caution when assigning speed dial location numbers (01-09) in memory.
If the location already has an entry stored, the new entry will be stored over the old
and it will be deleted. Be careful not to save over entries you do not wish to delete from
memory.If memory is full, after press SELECT. MEMORY FULL will display with error
tones.
5. Using the chart below, enter up to 15 characters for the name you're storing with
the number. Use
add a space.
t 2429 Manual .pmd
until the screen displays SPEED DIAL
ENTER 1-9
to backspace and make corrections; use
11
11
.
.
ENTER NAME
to advance and
12/10/2004, 4:30 PM
.